Back to Blog
How-to Guides 2026-11-20 High-Quality, Affordable Backpacking Gear 0 views

Elevate XL Insulated Sleeping Pad: Pump Bag Setup Guide

Elevate XL Insulated Sleeping Pad: Pump Bag Setup Guide

Learn how to inflate your Elevate XL insulated sleeping pad quickly and without dizziness using the Elevate pump bag. Step-by-step setup, care tips, and specs.

Why Use a Pump Bag for Your Elevate XL

Inflating a sleeping pad by mouth can leave you dizzy, especially at higher elevations. The Elevate pump bag is designed to solve that problem. It attaches directly to your Elevate XL pad and uses air from the bag—not your lungs—so you avoid moisture buildup inside the pad that can lead to mildew. Plus, it doubles as a waterproof stuff sack, saving pack space and weight.

How to Inflate the Elevate XL with the Pump Bag

Set up your sleeping pad on a clean, flat surface away from sharp objects. Open the dual-opening valve on the pad to ensure air can flow freely.

  1. 1. Attach the nozzle: The pump bag's included nozzle fits all Elevate sleeping pads. Push it firmly into the pad's valve opening.
  2. 2. Fill the bag with air: Open the pump bag fully and scoop air into it by holding the top open and moving it through the air. You don't need to blow into it.
  3. 3. Roll the bag to inflate: Roll the top of the bag down toward the nozzle to push air into the pad. The large pump bag requires about 5 full rolls to fully inflate the Elevate XL.
  4. 4. Close the valve: Once the pad is firm, remove the nozzle and close the dual-opening valve. The pad's 3.5-inch thick air-cushioned construction will provide a supportive sleeping surface.

Elevate XL and Pump Bag Specs at a Glance

  • Elevate XL Insulated Sleeping Pad: The Elevate XL weighs 20.5 ounces and has an ASTM R-value of 5.7, making it suitable for 4-season use. This warmth-to-weight ratio means you can take it from summer trips to freezing winter excursions without carrying extra gear.
    Elevate XL Insulated Sleeping Pad
    Elevate XL Insulated Sleeping Pad
  • Elevate Pump Bag: The Elevate pump bag weighs only 2.3 ounces and is made from 20D rip-stop nylon with PU waterproofing and taped seams. At just over 2 ounces, it adds negligible pack weight while also serving as a waterproof stuff sack for your gear.
    Elevate Pump Bag
    Elevate Pump Bag

Deflation and Packing Tips

When it's time to pack up, open the dual-opening valve fully. Push down on the pad to force air out, then roll it from the foot end toward the valve to expel remaining air. The pump bag can then be used as a stuff sack for the pad or other gear. Because the pump bag prevents moisture from entering the pad, you reduce the risk of mildew over time.

What the Catalog Doesn't Specify

The supplied information does not include specific instructions for cleaning the pump bag or pad, nor does it detail recommended storage humidity levels. For long-term storage, keep the pad dry and loosely rolled. The pump bag's waterproof coating and taped seams make it suitable for wet conditions, but avoid storing it fully compressed for extended periods.

Related Articles

Customer Service
Home
Products
Cart
Profile